Hippo Industries
Your One Stop Source for Industrial, Maintenance, Janitorial & Environmental Products
10,000 Products & 35 Locations Nationwide - TOLL FREE: (888)767-4477
Home | About Us | Quantity Discounts | Manufacturers | Contact us | Our Locations | Search |  
 Store FrontAccountSearchProduct ListBasket Contents Checkout 
Sign In

Can't Find it?
Call Toll Free: (888)767-4477

Can Liners
Chemicals
Facility Maintenance Products
Floor & Carpet Care
Floor Maintenance Equipment
Floor Pads, Sponges & Abrasives
Food Service
Matting/Rugs & Utility Cleaning Tools
Mopping Equipment
Odor Control
Paper Products & Dispensers
Personal Care & Safety Supplies
Skin Care
Storage & Material Handling
Waste Receptacles
Wipers-Towels-Rags
Brooms, Brushes, Pans & Accessories

Absorbent Products
Spill Response & Control
Material Handling
Containment Products & Systems
Plant Safety
Epoxy Products & Compounds
  Epoxytex Floor Coatings


EpoxyGator® Mason Stick Epoxy- SIZE: 7", 4oz (Super Size)

 
EpoxyGator® Mason Stick Epoxy- SIZE: 7", 4oz (Super Size)Quantity in Basket: none
Code: MASSTK4
Price:$8.80

Shipping Weight: 0.25 lbs.
 
 
 
Quantity:
 
Technical Specs: EpoxyGator® Mason Stick  (Quick Setting)

Two component, ready to use simply by cutting amount desired, kneading by hand to a uniform consistency and apply.  Specifically designed for all concrete & masonry repairs. Will bond concrete to metal, concrete to wood, concrete to plastics, concrete to glass and concrete to concrete.

● Excellent for Emergency Repairs to Concrete, Stucco, Block and Brick.
● Seal, Bond, Repair & Refurbish
 
● Non-Shrink Properties
● Can be drilled, tapped, sanded, machined and even painted
● Repair cracked floors, steps and ramps
● Seal basement leaks
● Fill crack and voids in concrete trim moldings & lawn ornaments
● Anchor bolts, screws, machine legs, railings
● Contains no solvents, thus non-flammable

Jenny W. from Tampa Florida writes, "Great product! I repaired by bird bath with this Mason Stick. Thank you"

Directions for use:

Area must be clean and free of oils and dirt.  For best results use a wire brush to scratch the surface to ensure proper bonding.  If any oil is present, please wash/wipe it away using a solvent or cleaner.  Damp surface is okay.

Cut the desired amount using a knife.  Mix by kneading to a uniform consistency.  All our epoxy putty sticks are two component and are conveniently colored.  While mixing make sure both colors have blended well.  Cooler weather will make the epoxy hard to mix.  Simply heat up the epoxy stick until room temperature and use.  After mixing, immediately apply within 1.5 minutes to the area. During the curing phase, material can be smoothed using slight damp fingers. Wash hands with soap and water after use.

Pot Life: Approximately 5 minutes depending upon ambient temperature
Initial Cure: 10 minutes to harden
Full Cure: 60 minutes
Shelf Life: 2 Years Unopened Tubes
Compressive Strength: 9500 lbs p.s.i
Shrinkage: <1
VOC Content: 0%
Operating Temperature: 250 F
Chemical Resistance: Resistant to all general MRO liquids. 
                                Please contact 516-624-9774 for Chemical 
Packaging: Sizes available: 2oz (Length 3.5 Inches) & 4oz. (Length 7 1/8 Inches)
Cured Color: Concrete Gray

 © Copyright Hippo Industries Inc., 2005, All rights reserved.
Member of Industrial Digest